# How to Code an Interview Transcript: A Step-by-Step Guide

**By [David Dat Nguyen](https://sonix.ai/authors/david-dat-nguyen), Co-Founder & Chief Experience Officer**

Learn how to code an interview transcript in five steps, from a checked transcript to first-cycle codes, categories and themes, with sourced definitions.

- Published: 2022-11-07
- Updated: 2026-11-19
- Category: [Did you know?](https://sonix.ai/resources/topics/did-you-know/)
- Reading time: 19 min
- Language: English
- HTML version: https://sonix.ai/resources/how-to-code-an-interview-transcript/

---

To code an interview transcript, start with an accurate, speaker-labeled transcript, read it through, then attach short labels (codes) to the passages that matter for your [research](https://sonix.ai/resources/best-transcription-software-for-qualitative-research/) question. Group related codes into categories, re-code in further rounds, and develop the categories into themes or a theory you can write up. This guide shows how to code an interview transcript in five steps, defines each coding method from its academic source, and explains how to move a finished transcript into NVivo, ATLAS.ti or MAXQDA.

Qualitative [research](https://sonix.ai/resources/best-transcription-software-for-qualitative-research/) utilizes non-numerical forms of evidence to support a hypothesis. It could include focus groups, documents, records, or [interviews](https://sonix.ai/resources/best-transcription-software-for-interviews/). These types of evidence add color to a study rather than focusing exclusively on the numbers.

Coding an interview allows you to structure and interpret your findings. Figuring out how to code interview data will enable you to get organized and produce more rigorous studies. But, in order to code an interview, you must know how to [transcribe an interview](https://sonix.ai/resources/how-to-transcribe-an-interview-a-complete-guide/) recording.

## Key Takeaways

- A code is a word or short phrase that captures what a portion of the transcript is about. Codes are grouped into categories, and themes are developed from the categories.
- Coding happens in cycles. First-cycle methods such as in vivo, process, descriptive and structural coding label the data. Second-cycle methods such as pattern, focused, axial and theoretical coding reorganize those labels.
- Thematic analysis, as set out by Virginia Braun and Victoria Clarke in 2006, has six phases, from familiarising yourself with the data to producing the report. The phases are recursive, not a straight line.
- Coding is an interpretive act. Software such as NVivo, ATLAS.ti and MAXQDA stores and retrieves your codes, but the decisions stay with you.
- Coding starts from the transcript. Sonix returns a timestamped, speaker-labeled transcript of a one-hour interview in about 5 to 6 minutes, with a dedicated NVivo export and a DOCX export that ATLAS.ti and MAXQDA import.

## What is Coding in Qualitative Research?

Coding in qualitative research is the process of categorizing and labeling segments of textual data, such as interview transcripts, to identify patterns, themes, or concepts. Researchers assign short phrases or codes to parts of the data that represent key ideas or recurring concepts.

These codes help organize the data and facilitate deeper analysis by grouping similar information together. Through coding, researchers can uncover underlying themes, relationships, and insights that help answer research questions.

It’s a systematic way of making sense of large volumes of qualitative data, ensuring that meaningful patterns and trends are identified.

Johnny Saldaña, whose book *The Coding Manual for Qualitative Researchers* (SAGE) is devoted entirely to codes and coding, defines a code as “most often a word or short phrase that symbolically assigns a summative, salient, essence-capturing, and/or evocative attribute for a portion of language-based or visual data.” He also separates three terms that often get mixed up. A code labels a piece of data. A category is a group of codes that belong together. A theme, in his words, is “an outcome of coding, categorization, and analytic reflection, not something that is, in itself, coded.”

## Why are Interviews Useful for Qualitative Research?

Building on the importance of coding in qualitative research, [interviews](https://sonix.ai/resources/best-transcription-software-for-interviews/) are one of the most commonly used data collection methods due to their depth and flexibility. Here’s why interviews are particularly useful for qualitative research:

- **In-depth Exploration**: Interviews allow researchers to explore complex issues, emotions, or experiences in-depth, providing rich, detailed insights that might be missed with surveys or other methods.
- **Flexibility**: Interviews can be semi-structured or unstructured, allowing the researcher to probe for more information or clarify responses, leading to a more nuanced understanding of the topic.
- **Understanding Personal Perspectives**: Interviews provide a platform for participants to express their views in their own words, offering unique insights into their personal experiences, beliefs, and attitudes.
- **Contextual Understanding**: Interviews help researchers capture not only the what, but also the why behind participants’ behaviors and decisions, revealing the context that shapes those actions.
- **Building Rapport**: The face-to-face or conversational nature of interviews often enables participants to feel more comfortable, fostering open, honest dialogue.
- **Clarifying Complex Topics**: Interviews give participants the opportunity to ask questions, ensuring that complex or sensitive topics are discussed clearly and thoroughly.

## How Long Does It Take to Code an Interview Transcript?

There is no standard figure for how long it takes to code an interview transcript, and the academic sources do not give one. The time depends on several factors. One of the primary considerations is the length of the interview. Naturally, longer interviews or focus group discussions will require more time for both transcription and coding.

Additionally, the complexity of the data plays a crucial role. Interviews containing complex or nuanced information may take longer to code, as more effort is needed to identify multiple themes, patterns, and sub-themes within the data.

The experience level of the researcher is another important factor. Researchers who are more experienced with coding techniques are likely to work faster, whereas beginners might need extra time to familiarize themselves with the coding methods described below.

The coding approach matters too. Working from a predefined framework (a deductive or “top down” approach) gives you a starting list of codes. Developing codes and themes from the data itself (an inductive or “bottom up” approach) means building that list as you read. Braun and Clarke describe both routes and add that analysis is a process that develops over time and “should not be rushed.”

The step you can shorten is transcription. With [interview transcription software](https://sonix.ai/interview-transcription), the first draft takes minutes. Sonix states that a one-hour recording comes back as a transcript in about 5 to 6 minutes, which leaves your hours for reading and coding. The coding itself still takes several passes through the data, because, as Saldaña puts it, “coding is a cyclical act.”

## How to Code an Interview Transcript

Learning how to code qualitative interviews requires following several steps. To get to the point where you can successfully code a transcript, you must create a transcription of each interview you conduct.

The five steps below follow the usual order of work: transcribe, do a first coding pass, build categories, re-code, and write up. Expect to move back and forth between them.

### Step One: Transcribe Your Interview

Transcribing interviews manually can be a daunting task. It requires immense focus, constant pausing, replaying, and rechecking to ensure accuracy, making it time-consuming and mentally exhausting.

The transcript also sets the ceiling for your analysis. Braun and Clarke write that thematic analysis needs, at a minimum, a rigorous and thorough “verbatim” account of all verbal utterances, and that transcripts should always be checked back against the original audio. If you need every filler word and false start kept, ask for [verbatim transcription](https://sonix.ai/verbatim-transcription) from the start. Sonix also has a short piece on [why researchers transcribe interviews](https://sonix.ai/resources/why-you-should-transcribe-interviews-when-doing-qualitative-research/) in the first place.

An automated draft that you then check against the audio saves most of that effort. In Sonix, the work looks like this:

1. **Upload the audio or video file.** Sonix transcribes in 54+ languages and, by its own figures, returns a one-hour file in about 5 to 6 minutes.
2. **Check the draft against the audio.** In the browser editor, click any word to play the audio from that moment, and correct names and technical terms. Sonix states up to 99% accuracy on clear audio, so plan a review pass, and a closer one for crosstalk or poor audio.
3. **Rename the speakers.** Sonix labels turns Speaker 1, Speaker 2 and so on. Rename them to participant codes such as P01 and P02, and the labels carry through the transcript and into every export.
4. **Export for coding.** Use the dedicated NVivo export, or download a DOCX file with speaker labels and timestamps for ATLAS.ti, MAXQDA or coding in Word.

What Sonix does not do: it does not capture the interview itself (you upload a file you already have), it does not apply codes, and it does not create native NVivo project files. It is the transcription step in a workflow built around your analysis software, which is how Sonix describes its [transcription for researchers](https://sonix.ai/researchers).

If your ethics protocol asks where the data sits, Sonix’s security page states that it is SOC 2 Type 2 certified, stores customer data with AWS in the USA, and never uses your audio, video or transcripts to train its models.

On cost, Pay As You Go is $10 per hour of audio and the Core plan is $25 per month with 5 hours included, as of November 2026 ([Sonix pricing](https://sonix.ai/pricing)). Students, educators and staff with a verifiable school email address can claim 20% off. To try it on one of your own interviews first, [start a free trial](https://sonix.ai/accounts/sign_up): it covers 30 minutes of transcription and needs no credit card.

### Step Two: First-Round Coding Pass

The next step in how to code an interview transcript is to perform the first-round pass. You will begin by reading through your data and assigning different codes to various parts of the interviews you took.

Your codes don’t need to be perfect at this stage since they will evolve as you move further into the process. Initially, you need to decide which parts of your data to code and the names of each code.

Saldaña calls this stage first-cycle coding. Here are the first-cycle methods most often used on interview transcripts, defined as they are in the [glossary of his manual’s fourth edition](https://study.sagepub.com/saldanacoding4e/student-resources/glossary-flashcards):

| Coding method | What you do | Example codes from the manual |
|---|---|---|
| In vivo coding | Use words or short phrases from the participant’s own language as codes, placed in quotation marks. | “hated school”, “stopped caring” |
| Process coding | Use gerunds (“-ing” words) to capture observable and conceptual action in the data. | telling others, rejecting rumors |
| Initial coding | The open-ended first stage of a grounded theory approach. Break the data into discrete parts, examine them closely and compare them for similarities and differences. | dispelling stereotypes |
| Descriptive coding | Summarize the basic topic of a passage in a word or short phrase, most often a noun. | businesses, houses, graffiti |
| Structural coding | Apply a content-based or conceptual phrase to a segment that relates to a specific research question. Suited to studies with multiple participants and semi-structured interviews. | unsuccessful smoking cessation techniques |
| Values coding | Apply codes that reflect a participant’s values, attitudes and beliefs. | respect (coded as a value) |
| Simultaneous coding | Apply two or more different codes to a single piece of data when it carries more than one meaning. | inequity and school district bureaucracy on the same passage |

Here is what a first pass looks like on a real excerpt. In the opening chapter of the manual, Saldaña codes an interview in which a high school senior describes his favorite teacher:

| Interview excerpt | Code |
|---|---|
| “He cares about me. He has never told me but he does.” | SENSE OF SELF-WORTH |
| “He’s always been there for me, even when my parents were not. He’s one of the few things that I hold as a constant in my life. So it’s nice.” | STABILITY |
| “I really feel comfortable around him.” | “COMFORTABLE” |

The third code is an in vivo code, taken directly from the participant’s words. If you would have chosen different codes, that is expected. Saldaña’s comment on his own example is that coding is not a precise science but “primarily an interpretive act.”

The type of coding system you decide to use when working out how to code an interview transcript depends on the nature of your study, its participants, and what you want to achieve.

### Step Three: Create Categories and Subcodes

Once you have completed your first pass and assigned your coding type, you can start creating categories. A category is simply a group of codes.

Organizing these categories depends on your study and research methods. Some people may group similar codes or link them based on a general concept or a topic.

It usually requires trial and error to find the structure that makes sense for your interview data analysis.

Keep a codebook as you go. Saldaña describes it as a separate file listing each code, a description of its content and a brief data example. A codebook matters most when several people code the same interviews, because it becomes the team’s shared standard. If you work alone, he suggests talking your coding through with a colleague or mentor as you progress.

### Step Four: Complete Further Rounds of Coding

The initial coding pass is viewed as fast and loose. Further rounds of coding involve re-examining those codes and categories. You may re-code, recategorize, or rename your codes with each phase.

Subsequent coding rounds hone in on finding additional patterns, reanalyzing your qualitative data, and moving toward developing concepts and theories.

You will find that as you move through each round, the number of codes you have will decrease. Remember, you are actively searching for how best to code your interviews coherently.

Saldaña calls these later rounds second-cycle coding. Which method you use depends on your methodology. Here are the approaches researchers most often apply to interview transcripts at this stage.

#### Thematic Analysis

Braun and Clarke define thematic analysis as “a method for identifying, analysing, and reporting patterns (themes) within data.” Their 2006 paper, “Using thematic analysis in psychology” (*Qualitative Research in Psychology*, 3(2), 77 to 101), sets out six phases:

1. Familiarising yourself with your data
2. Generating initial codes
3. Searching for themes
4. Reviewing themes
5. Defining and naming themes
6. Producing the report

They stress that this is not a linear process. You move back and forth between phases as needed. The authors have since renamed some of the phases, and their current wording is on [their own thematic analysis site](https://www.thematicanalysis.net/doing-reflexive-ta/).

Pattern coding is a common companion at this stage. In Saldaña’s glossary, a pattern code is a category label, or “meta code”, that identifies similarly coded data. One of his examples is the pattern code “dysfunctional direction” for the related codes “unclear instructions” and “rushed directions”.

#### Focused Coding

Focused coding follows in vivo, process or initial coding. It searches for the most frequent or significant initial codes and uses them to develop the most salient categories in the data. It is most closely associated with grounded theory, though Saldaña lists it as appropriate for virtually all qualitative studies.

In grounded theory, axial coding comes next. Axial coding describes a category’s properties and dimensions and explores how the categories and subcategories relate to each other.

#### Theoretical Coding

Theoretical coding is the culminating step toward a grounded theory. In Saldaña’s words, it “functions like an umbrella that covers and accounts for all other codes and categories formulated thus far.” The aim is to find the central or core category that identifies the primary theme of the research. The code is not the theory itself. It is an abstraction that models how all the codes and categories fit together.

#### Elaborative Coding

If you are conducting subsequent studies that build upon another, elaborative coding will be your go-to system.

Elaborative coding builds on a previous study’s codes, categories and themes while a current, related study is underway, to support or modify what the earlier project found. It needs at least two different yet related studies.

### Step Five: Create Your Final Narrative

You are not bound by a single coding system. Saldaña’s manual includes a method for exactly this, eclectic coding, which combines two or more compatible first-cycle methods on the understanding that later rounds of re-coding will pull the codes into a more unified scheme.

Your final outcome depends on the type and purpose of your research. It could be a theory, narrative, or your findings.

You will develop your findings and use the codes and categories to build your narrative during your conclusion. The process enables other researchers to follow up on your coding throughout their interviews to challenge and re-align your theory.

Braun and Clarke describe the task of this final phase as telling “the complicated story of your data in a way which convinces the reader of the merit and validity of your analysis.” In practice that means choosing data extracts that show each theme clearly and explaining how you got from codes to conclusions.

## How to Move a Sonix Transcript into NVivo, ATLAS.ti or MAXQDA

Sonix does not code transcripts. It produces the transcript that your qualitative data analysis software imports. The table below is built from each vendor’s published documentation, checked in November 2026. Run one interview through your own setup before you commit a whole study to it.

| Coding software | What its documentation says about transcripts | What to export from Sonix |
|---|---|---|
| NVivo | A transcript is imported into an audio or video file that is already in the project. Open the file, turn on edit mode and choose Import Rows on the Edit tab. Each row holds a timespan, the content and, optionally, a speaker. ([NVivo 15 help](https://help-nv.qsrinternational.com/15/win/Content/files/import-audio-video-transcripts.htm)) | The dedicated NVivo export, which produces transcript rows with a timestamp and speaker for each paragraph. |
| ATLAS.ti | Supported transcript formats are VTT, SRT, TXT, DOCX and RTF. Sonix is on the manual’s list of services that export compatible formats. ([ATLAS.ti 26 manual](https://manuals.atlasti.com/Win/en/manual/Transcription/Transcription.html)) | A DOCX file with speaker labels and timestamps. Sonix has no dedicated ATLAS.ti export. |
| MAXQDA | On the Import tab, choose Transcripts and pick the transcription software from the drop-down. Sonix is on the list. MAXQDA recommends a DOCX export with timestamps and speakers enabled, and asks for the matching media file during import. ([MAXQDA help](https://www.maxqda.com/help/import/transcripts)) | A DOCX file with speaker labels and timestamps. |

Two details save time later. First, rename speakers to participant codes in Sonix before you export, so the same labels appear in every file. Second, keep the audio or video file with the transcript. NVivo needs the media file in the project before it will accept transcript rows, and MAXQDA asks for the matching media file during import.

## Tools for Coding an Interview Transcript

When it comes to coding qualitative data, having the right tools can make the process more efficient and accurate. Sonix handles the transcription, and the coding happens in one of the tools below or on paper. The descriptions come from each product’s own website and documentation, checked in November 2026.

- **Sonix**: Transcription for the step before coding. Speaker labels, a timestamp on every word, and exports to DOCX, TXT, PDF, CSV and NVivo. Its [AI transcript analysis](https://sonix.ai/features/ai-analysis) can summarize an interview and surface recurring themes as a first read, which Sonix itself says to check beside the transcript. It is not a substitute for coding.
- **NVivo**: Qualitative analysis software in which you code the text of a transcript or code directly on the media timeline.
- **ATLAS.ti**: Qualitative analysis software that imports transcripts in VTT, SRT, TXT, DOCX and RTF formats.
- **MAXQDA**: Qualitative analysis software with a dedicated transcript import for a list of transcription tools.
- **Dedoose**: Describes itself as a cloud-based application for analyzing qualitative and mixed methods data.
- **Transana**: Describes itself as a tool for the analysis of video, audio, image, text, PDF and survey data.
- **Paper or a word processor**: Saldaña recommends that for first-time or small-scale studies you code on hard-copy printouts first, then transfer the codes to an electronic file once they feel settled.

## Make Creating Interview Transcripts Easier with Sonix

Coding is an essential part of any study that utilizes qualitative data to develop a theory, narrative, or conclusion. The coding process can be highly in-depth, meaning it will take time to find the right system for you.

Successful interview coding begins with your transcript. Upload your next interview to Sonix, check the transcript against the audio, and export it for NVivo, ATLAS.ti or MAXQDA. The free trial covers 30 minutes of transcription with no credit card.

## Frequently Asked Questions

### How to Format an Interview Transcript?

An interview transcript should be formatted in a clear and organized manner to ensure readability and ease of analysis. Start by including a heading with relevant information such as the interviewer’s name, interviewee’s name, date, and location of the interview.

The dialogue should be structured with the interviewer’s questions and interviewee’s responses clearly marked, usually by initials or names, followed by a colon and the corresponding dialogue. If there are non-verbal cues or interruptions, these can be noted in brackets to provide context. Consistent formatting, such as line spacing and clear paragraph breaks, will help in organizing the transcript for further analysis.

### How Many Codes Should You Have?

There is no fixed number. Saldaña’s manual reports two rules of thumb from other methodologists. Lichtman (2006) projects that most qualitative studies in education generate 80 to 100 codes, organized into 15 to 20 categories and then five to seven major concepts. Creswell (2007) expands a short list of codes to no more than 25 to 30 categories that combine into five or six major themes. Saldaña adds that there is no standardized or magic number.

### Can You Code an Interview Transcript by Hand or in Word?

Yes. Saldaña recommends that first-time researchers and small-scale studies code on hard-copy printouts first, because learning to code and learning complex software at the same time can be overwhelming. Print the transcript double-spaced with a wide right-hand margin for writing codes and notes, and keep a separate code list. Move to software such as NVivo, ATLAS.ti or MAXQDA when the number of interviews makes paper hard to search.

### Do You Have to Code the Whole Transcript?

Methodologists disagree. Saldaña notes that some hold that every recorded detail is worth considering, while others code only the most salient portions of the data. The risk of skipping passages, he warns, is that they may contain the pieces that would have pulled the analysis together. Braun and Clarke’s advice for thematic analysis is to code for as many potential themes as time permits and to keep a little of the surrounding text with each coded extract so the context is not lost.

### Can AI Code an Interview Transcript for You?

[AI tools](https://sonix.ai/resources/top-6-ai-tools-for-audio-and-video/) can produce a first read. Sonix’s AI transcript analysis, for example, summarizes an interview and surfaces recurring themes, and Sonix advises reading the result beside the transcript. That is a starting point for your own reading, not a coded dataset. Coding is an interpretive act tied to your research question and methodology, so the codes you report should be ones you applied, checked and can explain.

---

*Source: https://sonix.ai/resources/how-to-code-an-interview-transcript/. Markdown rendering of the page for AI and agent readers.*
